DM-610 digital dual-axis tilt sensor
Introduction:
DM-610 digital dual-axis inclination sensor is suitable for long-term measurement of the horizontal or vertical inclination of hydraulic structures such as concrete dams, face dams, earth-rock dams, etc. It is also suitable for industrial and civil buildings, roads, bridges, tunnels, roadbeds, civil foundation It can be used to measure the inclination of pits, etc., and can be easily used for the measurement of the inclination angle of the model test, which is convenient for the automation of the inclination measurement.
It adopts silicon micro-differential working principle, high sensitivity and precision, and is not affected by temperature under normal temperature conditions. Single-axis and dual-axis measurement can be selected arbitrarily. The sensor outputs RS485 digital signal or 0-5V analog signal. It can be easily integrated into the user's use environment. The product has a wide voltage working range of 9~24V; it has long-term stability and high waterproof performance.
Technical parameter:
Product Name: Digital Dual Axis Inclination Sensor
Measurement direction: X, Y dual-axis inclination
Range: ±15°, ±30°
Overload capacity: 120% of rated range (overrange will not be damaged)
Resolution: <0.003°
Output voltage: RS485/0-5V optional
Input voltage: 9-36V optional
Output frequency: 10Hz
Accuracy: 0.2%FS
Notice:
During the installation process, it should be ensured that the installation surface of the sensor is parallel to the surface to be measured, or is tightly fitted, and the axis of the sensor and the axis of the measured direction are as parallel as possible to avoid the angle between the axes.
